Vivitek DU9900Z-BK Professional WUXGA Laser Projector (22,000 Lumens) DU9900Z-BK

• Support Advanced DMD Chip: The DU9900Z is a DLP laser projector equipped with advanced DMD single-chip technology and delivers incredible brightness of 22,000 lumens for clear, crisp and bright projection.

• Building-in Edge Blending: The DU9900Z features edge blending capability. Multiple projectors simultaneously project a combined image for a stunning display and seamless image on large displays.

• Zoom, Focus, Lens Shift, and Memory: The DU9900Z comes with powered zoom, focus, and lens shift (horizontal/vertical) for easy adjustment and positioning flexibility. Lens Positioning Memory also offers quick recall of user-defined lens positions (focus, zoom, and lens shift) for easy setup to ensure perfectly proportioned images.

• Supports 3G-SDI & HDBaseT Connectivity: The DU9900Z has built-in 3G-SDI and HDBaseT interfaces for long-distance signal transmission of high-quality audiovisual content. HDBaseT reduces cabling requirements and installation, saving time and costs.

• Liquid Cooling System: Vivitek’s DU9900Z features a novel cooling system based on three components: Liquid, Air and Thermoelectric (TEC) cooling to reduce and dissipate heat from critical components to ensure stable operation and longevity.

• PJ-Control Tool: Vivitek’s PJ-Control software is a tool for controlling Vivitek projectors. It can be used to manage multiple projectors, helping users control viewing options, settings, and scheduling, and it also allows for the adjustment of display features over a network.

• IP6X Sealed Optical Engine Certified Design: The DU9900Z complies with high standards for protection against dust, ensuring consistent brightness over time.

• Picture-in Picture / Picture-by-Picture: The DU9900Z features Picture-in-Picture and Picture-by-Picture modes. Signals can be delivered from two different digital input sources at the same time.

• Picture-in-Picture (PIP) for simultaneous image projection from two active sources.
• HDBaseT interface with support for distribution of digital video content over standard CAT5e/6 LAN cable.
• Portrait mode projection allows the projector to be easily setup and installed in a 90° installation.
• 360° operation and projection design for set up in all angles.
• Instantaneous power-on & off, so no need for system pre-heating and postcooling.
• Airtight sealed engine and filter-less design for improved performance against dust and fibers.
• Frame sequential and dual channel 3D supported.
• Complete range of motorized interchangeable lens in sizes from 0.9 to 7:1 (optional).
• Optimized system layout with high efficiency cooling system.
• Heavy duty steel chassis for extra strength and integrity.
• 24/7 continuous operation with no downtime.
• Network ready for integration and system administration via RJ45.

• Data Sheet

RETURNS POLICY

Returns for factory sealed, non-defective items shipped from Almo warehouse:

• No restocking fee within the first 30 days from the invoice date.
• 15% restocking fee after 30 days from the invoice date.
• 30% restocking fee after 60 days from the invoice date.
• No returns after 90 days from the invoice date.
• The customer will be responsible for any and all return shipping costs.

Returns for open, non-defective items shipped from Almo warehouse:

• 15% restocking fee within the first 30 days from the invoice date› 25% restocking fee after 30 days from the invoice date.
• 35% restocking fee after 60 days from the invoice date.
• No returns after 90 days from the invoice date.
• The customer will be responsible for any and all return shipping costs.

Returns for special order items and/or items shipped from the manufacturer:

• Request will be submitted to the manufacturer and if approved, any restocking fees will be passed on to the customer.
• The customer will be responsible for any and all return shipping costs.

Returns for concealed damage or defective items:

If/when you receive a damage/defective product, please hold on to its original manufacturer packaging/box, as photos will be required for review to return for credit/replacement. If the original manufacturer box is not available, the RMA
could result in being denied for credit/replacement. Should you have any questions or concerns, please notify the Returns Dept. asap.

• Please notify your sales person asap and submit the following seven pictures:

1. All four sides of the manufacturer box (front, back, left side, right side);
2. The serial number on the box (must be legible and match the serial number on the unit);
3. The serial number on the unit (must be legible and match the serial number on the box); and
4. The damage or defect to the unit (no zoomed in pictures please).

• If a replacement is needed, Returns will advise if the replacement can be sent at cost, or if a replacement purchase order will be necessary. If a replacement is not needed, Returns will advise on the next steps;
• Concealed damages must be reported within 30 days of the invoice date from Exertis Almo.
• Concealed damages and defective items may be referred back to the manufacturer in accordance with their DOA & Damage policy.

Returns for items with visible box damage:

• All damaged item(s) should be refused upon delivery. Please inform your sales person when an item is refused due to damage. A cost replacement will be sent for refused item(s) if needed. Credit will be issued for refused item(s) when
  a replacement is not needed.
• If the damaged item(s) are not refused, the Proof of Delivery (POD) should be noted “LCD or Item is Damaged” when signed for. If damage was not noted on the POD, the customer must notify the carrier and their sales person within 48 business hours of receipt. Please note who they spoke to at the carrier and reference a case number (if applicable). Returns will advise if a cost replacement can be sent.
• If damage was not noted on the POD and the carrier was not contacted within 48 business hours, a claim cannot be filed with the carrier. Returns will advise on next steps.

TAKE THE PAIN OUT OF RETURNS

When transporting product, unfortunate things sometimes happen. When they do, we’re all about making doing business easier. Our best-in-class returns allowance is here to help ease the burden of replacing damaged or defective goods.